Connecting Devices To SkyeFax

All devices must use our SIP Registration gateways or HTTP Authentication in order to connect to SkyeFax. Endpoint-based SkyeFax interconnection is not supported at this time. You can follow along here to configure your device via our SIP Credentials. 

ATAs

Connecting the ATA to SkyeFax

To connect your ATA to SkyeFax, you will need to create a new SIP Credential for your ATA and select "ATA" as the device type:

Supported ATAs

• Cisco SPA 112 (SkyeFax T.38)
• Grandstream HT802 (SkyeFax T.38)
• Cisco ATA191-MPP (SkyeFax T.38)
• SkyeFax HTTP ATA (SkyeFax)

We do not sell T.38 ATA's and recommend you work with your regular phone vendor for these devices. 

We recommend you read our best practices to configuring your fax machine for use of SkyeFax. You can do that here.